?>
XLC 2-1 Funktions-Pumpe PU-A04
Diese Minipumpe ist aus hochwertigem Aluminium gefertigt. Der Pumpenschlauch für AV und SV-Ventile lässt eine bequeme Handhabung auch an unzugänglichen Fahrradpositionen (Hinterraddämpfer) zu. Dank des 2-Wege Pumpsystems produzieren Sie sowohl bei der Pump-, als auch bei der Ziehbewegung bis zu 7 bar Pumpendruck. Ein Manometer zeigt Ihnen, wenn der erwünschte Reifendruck erreicht ist und Mithilfe der Auslösetaste ist eine präzise Druckeinstellung möglich. Das Verstellrädchen am Pumpengehäuse ermöglicht wahlweises Pumpem mit erhöhtem Druck oder erhöhtem Volumen.
Marke | XLC |
---|---|
Herstellernummer | 2501923400 |
Pumpen-Typ | Dämpferpumpe |
Farbe | Silber, Blau |
Ventilart | Autoventil (AV), Dunlop (DV), Französisches Ventil (SV) |
Maximaler Druck in Bar | 20 bar |
Manometer | Ja |
Material | Aluminium |
Lieferumfang | 1 Stück |
Zusatzinformationen | 2-way-system Pumps, which are equipped with a two-way system, build up pressure in both directions(both for the pressure movement as well as for the pull movement of the pump piston) The inflation process is so highly accelerated. High-Power mode For pumps fitted with high-power mode, it can be chosen between two pump modes.The pumps can be selectively switched over from the pump mode with a high volume into a pump mode with high pressure.This allows an extremely fast inflating of the tire with the final achievement of the desired pressure in the high-power mode. Manometer The gauge is a pressure measuring device for capturing and displaying of air pressure, such as bicycle inner tubes, forks or rear shock absorbers. Some of the XLC air pumps are serially ecquipped with manometers. Schrader-valve The Schrader valve is often found in mountain bikes. It also is used in motor vehicles, therefore it is often also called auto valve.One advantage of the Schrader valve is the possibility to inflate the tires on gas stations without the use of adapters. Sclaverand-valve The Sclaverand valve(also called french or racing bike valve) is high pressure capable and is suitable for MTB,racing or also tour bicycles.Condition for the filling is the screwing of the small knurled screw which is positioned on a threaded pin.In comparison to a car valve which close through a spring , the valve on the bike is closing up by overpressure of the tire. It dont has to be open mechanically because it opens itself already at a small pressure difference. |
XLC PU-A04 2-1 Funktionspumpe (20 bar | silber | 210mm | inklusive Pumpenschlauch) | |
---|---|
Information on product safety | |
Manufacturer | Accell Nederland B.V. Industrieweg 4 8444 AR Heerenveen Niederlande |
[email protected] | |
Homepage | https://www.xlc-parts.com |
Telefonnummer | +31 513 638 700 |